How To Keep Your Computer Awake Without Touching The Mouse

Problems on how to keep your computer awake without touching the mouse are frequently caused by a conflict between the software and hardware at startup. When a machine is supported by its power adapter, power surges or drops are more hazardous to a sleeping computer than those shutdown.

A sleeping machine’s heat exposes all components to greater temperatures for more extended periods. Computers that are always turned on may have a shorter lifespan.

A monitor can continue to sleep after a while of inactivity since that is what it is programmed to do. In addition, an outdated graphics card driver or a short life specified in Windows “power settings” are responsible. High-quality monitor systems often provide good performance over a lengthy period. However, users will occasionally encounter the issue of a monitor falling to sleep.

When a signal from the computer is detected, monitors will awaken from sleep mode. Click and drag the mouse or press any key on the keyboard to keep awake a computer or display from sleep or hibernation. If this does not work, turn on the computer by pressing the power button.

One of the most prevalent problems in Windows 10 and Windows 7 is how to keep your computer awake without touching the mouse. You may keep an eye on your system’s power settings, update your graphics card driver, and try turning off the screen saver.

How to Keep Your Mouse Active Without Touching It?

The detailed solutions on how to make your screen stay on longer are shown below. Let’s take a closer look-

Solution 1. Update your Power Settings

If your power settings are set to sleep for a short period of 5 minutes, you’ll notice that your computer continues going to sleep.

You may repair the problem by following these steps:

Windows 11

Step#1 – Click on Start then select Settings.

Windows 11 Start and Settings

Step#2 – Click on System then, select Power & Battery.

Windows 11 System, Power & Battery

Step#3 – Then click on Screen and Sleep to change your power and sleep settings in Windows 11.

Windows 11 Screen and Sleep

Step#4 – Now when you’re not using your device, choose how long you want it to wait before turning off the screen.

Windows 10

Step#1 – Choose Settings from the Start menu.


Step#2 – Click on System.


Step#3 – Then Power and Sleep from the drop-down menu.

Power and Sleep

Step#4 – Select the amount of time you want your device to wait before shutting off the screen when you’re not using it under the screen.

Windows 7

Step#1 Click the “Start” button at the bottom then select “Control Panel“.

Wiindows 7 Start Button and Control Pannel

Step #2 – Click on ”Hardware and Sound”.

Wiindows 7 Hardware and Sound

Step#3 – Select “Power Options” from the drop-down menu.

Windows 7 Power Options

Step #4 – If you are using Standard view, then again select Power Options.

Windows 7 Standard view Power Options

Step#5 – Then select “Change plan settings” from the drop-down menu.

Windows 7 Change plan settings

Step#6 – You may “turn off display” and “put the computer to sleep” after selecting the power profile you want.

Windows 7 turn off display and put the computer to sleep

Check to see whether the computer hasn’t gone to sleep yet. Otherwise, you’re OK to go.

IMPORTANT TIP: Do not select the “never” option as it will harm your system’s health, overheat and shorten its lifespan.

Solution 2. Update Faulty Graphics Driver Card

A malfunctioning or outdated graphics card driver, especially if you have a high-end graphics card installed, might cause the computer to sleep continually. You can try updating the graphics card driver to resolve the issue. For improved performance, manually update this malfunctioning card driver or use an alternative program.

Solution 3. Disable Screen Saver

The screen saver is a built-in feature of Windows. It will be enabled after a time of inactivity on Windows. If your screen saver is set to blank and the wait time is set to five minutes, your screen will appear to have turned off or gone to sleep mode. So you may turn off the screen saver and observe whether the issue still exists.

Solution 4 – Using Third-Party Program

Mouse movers are another name for mouse jigglers. Mechanical mouse jigglers are little devices placed on top of a user’s computer mouse.

Underneath the mouse, they employ a complete spinning platform or revolving disc. The movement is modest, yet it is sufficient to move the pointer on the user’s screen. You can also check this guide on how to move the mouse cursor with Keyboard.

Mouse Jiggler


Mouse Jiggler is a free of charge, convenient and straightforward Windows program that mimics mouse motions. As a result, apps that launch when there is no activity, such as your screensaver, will not run.

Mouse Jiggler is a valuable program that keeps your computer awake without requiring you to move your mouse.

How to Use

Because Mouse Jiggler is a portable software where the mouse moves on its own, there is no need to install it. Unzip file and launch the MouseJiggle.exe file when it has been downloaded. Check the ‘Enable Jiggle’ box in the dialogue box to use Jiggle.

The program will now visibly move your pointer on-screen and your computer won’t go to sleep. The conversation window can then be minimized by pressing the Down arrow icon.

Modes of Mouse Jiggler

‘Zen Mode’ is also available in this software, which does the same thing without requiring you to move your cursor. The software remembers your settings every session, but you may change them with command-line arguments.

Uncheck the ‘Enable Jiggle‘ or ‘Zen Mode‘ option to disable Mouse Jiggler. You can choose what works best for you.

Frequently Asked Questions (FAQs)

Can my employer detect a Mouse Jiggler?

The computer only perceives it as a pointing device, and thus it shouldn’t be noticed by an employer monitoring system. It’s safe to use with Skype, Microsoft Teams, Lync, and similar applications.

Why does my monitor continue to save in the energy-saving mode?

Because of inadequate power in the motherboard battery, screen idleness, or intermittent power supply from the source, your computer continuously enters into power-saving mode on Windows.

Eleggible’s Final Words

To ensure the security and safety of your computer’s health and longevity. Install anti-virus software, update your software regularly, and keep these basic suggestions in mind.

Maintaining a computer, Backup your files, Keeping your keyboard free of crumbs, cleaning your screen, cleaning the vents and fans, and using a surge protector. When your computer is not in use, switch it off, shut it down, or put it in sleep mode to keep it running efficiently and effectively.

Sleep mode consumes extremely little energy, so your computer boots up faster, and you’re right back where you left off. You don’t have to worry about losing work due to a low battery since Windows saves all of your work and switches off the computer if the battery is too low.

We tried to give you all the solutions on how to keep your computer awake without touching the mouse that you can try. We are sure that this will solve your issue. Try to give your feedback in the comment section below so we can add more points and improve on how to keep your computer awake without touching the mouse.

Leave a Comment